Publications

Amit Kumar Singh, Yasham Mundada, Priyanshu Bajaj, Markus B. Wilms, Jeet P Patil, Sushil Kumar Mishra, Amit Arora (2023). Microstructure engineering during directed energy deposition of Al-0.5Sc-0.5Si using heated build platform. International Journal of Heat and Mass Transfer, 2023.

PDF Project Project Source Document DOI

Justin Hijam, Rohit Gupta, Madhu Vadali, Amit Arora (2022). Modeling and Performance of Continuous Wave Laser Polishing of Electron Beam Melted Ti6Al4V. Manufacturing Letters, 2022.

PDF Project Project Source Document DOI

Prassan Shah, Navneet Khanna, Nishkarsh Srivastava, Amit Arora (2022). Comparison of LN2 and LCO2 based on machining performance indicators for drilling Inconel 718. Journal of Manufacturing Processes, 2022.

PDF Source Document DOI

Rajdeep Singh Devra, Nishkarsh Srivastava, Madhu Vadali, Amit Arora (2022). Polymer Filament Extrusion Using LDPE Waste Polymer: Effect of Processing Temperature. International Manufacturing Science and Engineering Conference, 2022.

Source Document DOI

Amit Kumar Singh, Yasham Mundada, Priyanshu Bajaj, Markus B. Wilms, Jeet P Patil, Sushil Kumar Mishra, Eric A. Jägle, Amit Arora (2022). Investigation of temperature distribution and solidification morphology in multilayered directed energy deposition of Al-0.5Sc-0.5Si alloy. International Journal of Heat and Mass Transfer, 2022.

PDF Project Project Source Document DOI

Amit Kumar Singh, Poonam Ratrey, Antonello Astarita, Stefania Franchitti, Abhijit Mishra, Amit Arora (2021). Enhanced cytocompatibility and mechanical properties of electron beam melted Ti-6Al-4V by friction stir processing. Journal of Manufacturing Processes, 2021.

PDF Project Source Document DOI

Mahesh V.P., J. Alphonsa, Amit Arora (2021). Electrochemical Behavior of Aluminum-Molybdenum Surface Composites Developed by Friction Stir Processing. Journal of Materials Engineering and Performance, 2021.

PDF Project Source Document DOI

Amit Kumar Singh, Alok Kumar Kanungo, V. Selvakumar, Amit Arora (2021). Ancient high-carbon steel from southern Tamil Nadu, India: microstructural and elemental analysis. Current Science, 121(2) 2021: 239-247.

PDF Source Document DOI

Mahesh V.P., Anurag Gumaste, Sooraj Patel, Amit Arora (2021). Joining of Polymer Matrix Composites Through Friction Stir Processes. In Encyclopedia of Materials: Composites.

Project Source Document DOI

Litton Bhandari, Jalaj Kumar, I. Balasundar, Amit Arora (2021). Variability in Fatigue Life of Near-α Titanium Alloy IMI 834. Transactions of the Indian Institute of Metals, 74(979-989).

PDF Project Source Document DOI

Kaushal Jha, Pankaj Sahlot, Amit Kumar Singh, Santosh Kumar, Amit Arora, R. N. Singh, G. K. Dey (2021). Heat transfer and materials flow modelling of FSW for CuCrZr alloy using experimentally determined thermo-physical properties. Metallurgical and Materials Transactions A, 52(680–690).

PDF Project Project Source Document DOI

Mahesh V.P., Ashutosh Kumar, Amit Arora (2020). Microstructural Modification and Surface Hardness Improvement in Al-Mo Friction Stir Surface Composites. Journal of Materials Engineering and Performance, 2020.

PDF Project Source Document DOI

Mahesh V.P., Anurag Gumaste, Neha Meena, J. Alphonsa, Amit Arora (2020). Corrosion Behavior of Aluminum Surface Composites with Metallic, Ceramic, and Hybrid Reinforcements Using Friction Stir Processing. Metallurgical and Materials Transactions B 51B (2020) 2131-2146.

PDF Project Source Document DOI

Arpan Rout, Anurag Gumaste, P Pandey, EF Oliveria, S Demiss, Mahesh V.P., C Bhatt, K Raphael, R S Ayyagari, PAS Autreto, M Palit, F Olu, DS Galvao, Amit Arora, CS Tiwary (2020). Bioinspired Aluminum Composite Reinforced with Soft Polymers with Enhanced Strength and Plasticity. Advanced Engineering Material (2020).

PDF Project Source Document DOI

Sheetal Pandya, Shubhankar Gurav, Gaurav Hedau, Sandip K. Saha, Amit Arora (2020). Effect of axial conduction in integral rough friction stir channels: experimental thermo-hydraulic characteristics analyses. Heat and Mass Transfer, (41)2020.

PDF Project Source Document DOI

Amit Kumar Singh, Bhoopendra Kumar, Kaushal Jha, Antonello Astarita, Antonino Squillace, Stefania Franchitti, Amit Arora (2019). Friction stir welding of additively manufactured Ti-6Al-4V: Microstructure and mechanical properties. Journal of Materials Processing Technology, 277(2020)(116433).

PDF Project Project Source Document DOI

Mahesh V.P., Amit Arora (2019). Effect of Tool Shoulder Diameter on the Surface Hardness of Aluminum-Molybdenum Surface Composites Developed by Single and Double Groove Friction Stir Processing. Metallurgical and Materials Transactions A, 50(11)(5373-5383).

PDF Project Project Source Document DOI

Amit Kumar Singh, Pankaj Sahlot, Manas Paliwal, Amit Arora (2019). Heat transfer modeling of dissimilar FSW of Al 6061/AZ31 using experimentally measured thermo-physical properties. The International Journal of Advanced Manufacturing Technology 105:771–783.

PDF Project Project Source Document DOI

Amit Arora, CS Tiwary, Arpan Rout, Anurag Gumaste, Mahesh V.P. (2019). Polymer reinforced metal matrix composites and a process for fabricating the same. Patent Application No. 201921032326.

Project

R Sharma, Amit Kumar Singh, Amit Arora, S Pati, PS De (2019). Effect of friction stir processing on corrosion of Al-TiB2 based composite in 3.5 wt.% sodium chloride solution. Transactions of Nonferrous Metals Society of China, 29(7)(1383-1392).

Project Source Document DOI

Arpan Rout, P Pandey, EF Oliveria, PAS Autreto, Anurag Gumaste, Amit Kumar Singh, DS Galvao, Amit Arora, CS Tiwary (2019). Atomically locked interfaces of metal (Aluminum) and polymer (Polypropylene) using mechanical friction. Polymer, 169(148-153).

PDF Project Source Document DOI

Pankaj Sahlot, Amit Kumar Singh, VJ Badheka, Amit Arora (2019). Friction Stir Welding of Copper: Numerical Modeling and Validation. Transactions of the Indian Institute of Metals, 72(1339-1347).

PDF Project Project Source Document DOI

AD Oza, A Kumar, V Badheka, Amit Arora (2019). Traveling Wire Electrochemical Discharge Machining (TW-ECDM) of Quartz Using Zinc Coated Brass Wire: Investigations on Material Removal Rate and Kerf Width Characteristics. *Silicon, *(1-12).

PDF Source Document DOI

Sheetal Pandya, Rajiv S Mishra, Amit Arora (2019). Channel formation during friction stir channeling process—A material flow study using X-Ray micro-computed tomography and optical microscopy. Journal of Manufacturing Processes, 41(48-55).

PDF Project Source Document DOI

Pankaj Sahlot, Amit Arora (2018). Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding. Wear, 408(96-107).

PDF Project Project Source Document DOI

Pankaj Sahlot, Saurabh S Nene, M Frank, Rajiv S Mishra, Amit Arora (2018). Towards attaining dissimilar lap joint of CuCrZr alloy and 316L stainless steel using friction stir welding. Science and Technology of Welding and Joining, 23(8)(715-720).

Project Source Document DOI

Pankaj Sahlot, Kaushal Jha, G. K. Dey, Amit Arora (2018). Wear-Induced Changes in FSW Tool Pin Profile: Effect of Process Parameters. Metallurgical and Materials Transactions A, 49(6)(2139-2150).

PDF Project Project Source Document DOI

V Tungala, Amit Arora, B Gwalani, Rajiv S Mishra, RE Brennan, KC Cho (2018). Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1). Materials Science and Engineering: A, 709(105-114).

Project Project Source Document DOI

Pankaj Sahlot, Kaushal Jha, GK Dey, Amit Arora (2017). Quantitative wear analysis of H13 steel tool during friction stir welding of Cu-0.8%Cr-0.1%Zr alloy. Wear, 378(2017)(82-89).

PDF Project Source Document DOI

Pragya N Banjare, Pankaj Sahlot, Amit Arora (2017). An assisted heating tool design for FSW of thermoplastics. Journal of Materials Processing Technology, 239(83-91).

PDF Project Source Document DOI

Amit Arora, Antonello Astarita, L Boccarusso, Mahesh V.P. (2016). Experimental Characterization of Metal Matrix Composite with Aluminium Matrix and Molybdenum Powders as Reinforcement. Procedia Engineering, 167(245-251).

PDF Project Source Document DOI

S Palanivel, Amit Arora, K J Doherty, Rajiv S Mishra (2016). A framework for shear driven dissolution of thermally stable particles during friction stir welding and processing. Materials Science and Engineering: A, 678(308-314).

Project Project Source Document DOI

Amit Arora, GG Roy, T DebRoy (2013). Cooling rate in 800 to 500 C range from dimensional analysis. Science and Technology of Welding and Joining, 15(5)(423-427).

Project Source Document DOI

VD Manvatkar, Amit Arora, A De, T DebRoy (2013). Neural network models of peak temperature, torque, traverse force, bending stress and maximum shear stress during friction stir welding. Science and Technology of Welding and Joining, 17(6)(460-466).

Project Project Source Document DOI

Pankaj Sahlot, Rajiv S Mishra, Amit Arora (2013). Wear Mechanism for H13 Steel Tool During Friction Stir Welding of CuCrZr Alloy. In TMS 2019.

Source Document

T DebRoy, A De, HKDH Bhadeshia, VD Manvatkar, Amit Arora (2012). Tool durability maps for friction stir welding of an aluminium alloy. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 468(2147)(3552-3570).

PDF Project Project Source Document DOI

Amit Arora, M Mehta, A De, T DebRoy (2011). Load bearing capacity of tool pin during friction stir welding. The International Journal of Advanced Manufacturing Technology, 61(9-12)(1-10).

PDF Project Project Source Document DOI

M Mehta, Amit Arora, A De, T DebRoy (2011). Tool Geometry for Friction Stir Welding—Optimum Shoulder Diameter. Metallurgical and Materials Transactions A, 42A(2716-2722).

PDF Project Project Source Document DOI

Amit Arora, T DebRoy, HKDH Bhadeshia (2011). Back-of-the-envelope calculations in friction stir welding–Velocities, peak temperature, torque, and hardness. Acta Materialia, 59(5)(2020-2028).

PDF Project Project Source Document DOI

Amit Arora, A De, T DebRoy (2011). Toward optimum friction stir welding tool shoulder diameter. Scripta Materialia,64(9-12).

PDF Project Project Source Document DOI

Amit Arora, Z Zhang, A De, T DebRoy (2009). Strains and strain rates during friction stir welding. Scripta Materialia, 61(863-866).

PDF Project Project Source Document DOI

Amit Arora, G G Roy, T DebRoy (2009). Unusual wavy weld pool boundary from dimensional analysis. Scripta Materialia, 60(68-71).

PDF Project Source Document DOI

Amit Arora, R Nandan, AP Reynolds, T DebRoy (2009). Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments. Scripta Materialia, 60(13-16).

PDF Project Project Source Document DOI